TriggerBeam HS Kit

The Triggerbeam HS Kit is a long range infrared beam device that can be used in many photographic or video projects. It is designed to easily capture images using Infrared beam breaking.

A wide variety of cameras and video cameras are supported, including digital and film based. The Triggerbeam HS can be connected directly to the camera’s remote trigger socket or to the Triggersmart control unit, offering the ability to tune the sensitivity of the sensors and delay the triggering of the capture device. The Triggerbeam HS can also support the camera’s single exposures or continuous shooting modes, dependent on the camera’s settings.

The Infrared beam range is up to 30 meters dependent on lighting conditions. State of the art microprocessor technology is employed which results in the system being able to operate reliably under most lighting conditions without false triggering.

The Triggerbeam HS is easy to set up, making it ideal for both beginners and professionals.

Features:

Range: darkness 30 metres, bright light 20 metres approx
Trigger time: 0.1 secs to 2 secs
Minimum break beam time: 1/250 sec
Trigger delay time: 1/100 sec
Infrared transmitter beam: 10 degrees
Wavelength: 950 nm
Trigger Outputs: to camera or TriggerSmart Mk1/2
Operation time: batteries up to 60 hours

TriggerBeam Kit includes:- Infrared receiver, Infrared transmitter, 2 x stakepods, 2 x weatherproof covers, 3m trigger cable 3.5 to 2.5 mm, Jack adapter 2.5 to 3.5 mm and 2 degrees infrared baffle.

Although standard cables are supplied, occasionally you may need to purchase an additional trigger adapter depending on your camera model. Check your camera model.

GO TO SHOP

FIND RETAILER